Applications

Rework

Model BXR-LFB has bar code scanning capabilities and will activate and read (@125Khz) all four (or five if the spare is TPM ID type) wheels on the vehicle in a specific order.

  1. LCD prompt displays "Scan VIN"
  2. Scan Bar Code on vehicle window
  3. There will be a confirming audible sound + light, upon successful bar code reading.
  4. In case of Bar Code Scan Fault, LCD prompt displays "Manual entry of Bar Code" – whereby the operator will use the keypad for manual entry, and then pushes the "enter" button.
  5. LCD prompt displays "Scan left front wheel"
  6. There will be a confirming audible sound + light, upon successful TPM ID reading. The six numbers of the left front wheel TPM ID will be momentarily displayed on the LCD.
  7. LCD prompt displays "Scan right front wheel"
  8. There will be a confirming audible sound + light, upon successful TPM ID reading. The six numbers of the right front wheel TPM ID will be momentarily displayed on the LCD.
  9. LCD prompt displays "Scan right rear wheel"
  10. There will be a confirming audible sound + light, upon successful TPM ID reading. The six numbers of the right rear wheel TPM ID will be momentarily displayed on the LCD.
  11. LCD prompt displays "Scan left rear wheel"
  12. There will be a confirming audible sound + light, upon successful TPM ID reading. The six numbers of the left rear wheel TPM ID will be momentarily displayed on the LCD.
  13. When vehicles have spare tires with TPM’s, the scanner will display "Scan spare tire".
  14. LCD prompt displays "Place tool in charger stand"
  15. After tool is placed in charger stand, and the VIN along with the four (or five) TPM ID’s are downloaded, LCD prompt displays "Ready"
  16. When tool is then taken out of charger stand, the sequence begins again, starting at #1.

Note:
a) Pushing the "clear" button at any time, will start the sequence over again, starting at #1.
b) If a "no read" condition happens at any wheel, then the operator can either "clear" (see a) and try again or the tire needs to be replaced with a working TPM.